Heatd Two Rollers Rolling Machine for PVC ABS Rubber Plastic Roll Mill

• Customization: Available
• After-sales Service: Online Service
• Warranty: 1 Year
• Model NO.: LR-A035
• Transport Package: Plywood Cases
• Specification: 125*112*145CM
• Trademark: LONROY
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200 Pieces/Month

Product Description

 

Lab Heatd Two Rollers Rolling Machine For PVC ABS Rubber Plastic Roll Mill Machine

Two Rollers Rolling Machine Its main function is to make the product can meet the customer's requirements of quality and color, in order to meet the customer's requirements, and then the results of the experiment and its ratio used in the production line, and this machine is the test of raw materials and compounds to be mixed evenly equipment.

  ROLL MILL TEST MACHINE For PVC ABS Rubber Plastic  ROLL MILL MIXING MACHINE 

Equipment introduction:

The open mixer is an open plastic material intermittent mixing equipment composed of two parallel rollers with adjustable gap between rollers. Its main function is to mix uniform raw materials for mixing, plasticizing, for calendering machine to provide mixed plasticizing uniform melt material. In the process of rubber mixing, the open mixer mainly relies on the extrusion and shearing action of two relatively rotating drums on the rubber. After several kneading and mixing, the mixing process will also be accompanied by chemical action, which will break the macromolecular chain inside the rubber, so that the various components inside the rubber mix and disperse evenly, and finally achieve the purpose of rubber mixing.

Scope of application:

Mainly used in rubber and its products, plastics and its products polyolefin, PVC, film, coil, profile production and polymer blending, pigment, color masterbatch, stabilizer, stabilizer and other industries, its main use is to test raw materials after mixing, its physical properties change, contrast. Such as: color dispersion, transmittance, material surface glossiness, with auxiliary materials after its strength, plasticity, hardness, etc.

 ROLL MILL TEST MACHINE For PVC ABS Rubber Plastic  ROLL MILL MIXING MACHINE 

Structural features:

1. The technology comes from Taiwan, and the main electronic components are Schneiders of France.

2. Water-cooled, surface temperature of 12 high-quality heating tubes, normal temperature -250 degrees, while the temperature is uniform,

3. The roller adopts vanadium titanium alloy cold cast iron, roll hardness (HRC)50-60, the inner cavity of the roller finishing to make the roller body temperature fast and uniform;

4. The machine adopts manual distance adjustment, digital display, easy adjustment

Intuitive, 0.1~8mm thickness control precision, easy to operate,

5. The machine is equipped with emergency braking, when there is an emergency accident, a total of 7 control switches, four corners of the emergency switch, after the leg, front top pull rod, after the top pull rod, convenient multi-position brake, convenient machine stop;

6. If there is any abnormality, press any switch to press the key, the two rollers can automatically reverse 1/4 circle

7. Automatic refueling device is the advantage of long-term oil supply to the transmission parts, which makes up for the serious consequences of manual refueling and forgetting to replenish the parts

8. We use two motors to drive, can realize the front and rear roller arbitrary speed ratio, can be easy to operate the front and rear;

9. The whole bottom plate, easy installation, transmission mode for single shaft output torque, bearing to reduce friction, save electricity and low noise and rubber thickness uniform parallel controllable;

10. The machine is set with high mechanical strength, the transmission device is controlled by double motor and double frequency converter, low noise and long service life;

Main technical parameters

Model Project	LR-A035-4	LR-A035-6	LR-A035-8
Roller Diameter (metric /inch)	120mm/4in	160mm/6in	200mm/8in
Roller face width	320mm	320mm	500mm
Mixing capacity	0.5~2.5kg	0.5~5.5kg	0.5~7kg
Roller temperature	RT~250ºC	RT~250ºC	RT~250ºC
Heating method	electrical heating	electrical heating	electrical heating
Temp Accuracy	1.5ºC	1.5ºC	1.5ºC
temperature controller	PLC control	PLC control	PLC control
Roller Rev	frequency control	frequency control	frequency control
Roller ratio adjusted according requirements	1:1.22/1:1.35 1:1.4	1:1.22/1:1.35 1:1.4	1:1.22/1:1.35 1:1.4
Roller hardness	50~60HRC	50~60HRC	50~60HRC
Roller processing	Mirror polishing chrome plated	Mirror polishing chrome plated	Mirror polishing chrome plated
Roller spacing	0.1~6mm adjustable	0.1~6mm adjustable	0.1~6mm adjustable
Spacing display mode	Calibration/digital display	Calibration/digital display	Calibration/digital display
Safety device	Collision type emergency stop	Collision type emergency stop	Collision type emergency stop
Safety device number	8 PCS	8 PCS	8 PCS
Special function	Emergency stop inversion	Emergency stop inversion	Emergency stop inversion
Motor power	2.2KW*2	3.7KW*2	5.5KW*2
Power voltage	φ3 AC380V	φ3 AC380V	φ3 AC380V
Dimension	1.24*1.1*1.4(M)	1.24*1.1*1.45(M)	1.75*1.2*1.55(M)
Weight	650kg	750kg	950KG