GA-507 Ring Initial Adhesion Testing Machine/Tester
The principle of GA-507 ring initial adhesion testing machine is to completely contact the ring sample with the standard float test plate at a constant speed of 300mm/min, and then automatically reverse the ring sample and the test plate at a constant speed of 300mm/min completely separate, the maximum force generated, the maximum force value is the annular initial adhesion of the tested sample. The instrument is the product of the connection of electronic skills and mechanical transmission. It adopts electromechanical integration design and is mainly composed of force sensor, transmitter, microprocessor, load driving mechanism, computer and color inkjet printer.
Scope of application
GA-507 ring initial adhesion testing machine is suitable for adhesive tape, protective film, label and other products for ring initial adhesion test, used to judge the initial viscosity index of adhesives, before the instrument came out, the initial viscosity detection is usually determined by rolling ball method, rolling ball method test process is simple and low cost, but the experimental results are not comparable with other types of initial adhesion tests. High viscosity adhesives do not always get good initial viscosity results. Due to the limitations of the rolling ball initial adhesion method, many manufacturers have been inclined to use the ring initial adhesion method to determine the initial adhesion of adhesive products. Compared with the traditional rolling ball method (GB/T4852-2002), the initial viscosity test data determined by the ring method has better repeatability, and the influence of temperature, test conditions and human factors on the test results is avoided.
Meet the standard
FINAT FTM 9 Ring initial viscosity test GB/T 31125-2014 ring method PSTC-16 LOOP TACK
Software introduction
As we all know, software is the soul of an instrument, although the hardware of the system provides the basis for measurement, but only with the support of the software, in order to perfectly realize the functions of the hardware, give full play to its potential, so that the overall function and performance of the system. The company developed customized adhesive tape stripping strength special measurement and control software since
2010 to provide customers with use, after 9 years of adhesive tape industry customer feedback, use requirements, national standards and foreign standards integration, has reached a very mature and stable state. The software control system with independent intellectual property rights (very few in the industry) has a great advantage in the future software upgrade and the replacement of new standards, ensuring that the test means and test standards are at the forefront of the industry.
GA-507 Ring Initial Adhesion Testing Machine/Tester
Instrument characteristics
The world-renowned force sensing system provides force accuracy better than 0.5, better repeatability, and multi-range selection. World-renowned brand operating system, with precision ball screw, stepless speed regulation, smooth operation. Limit protection, overload protection, automatic return and other intelligent design to ensure safe operation. The structure design is advanced and reasonable, the technology is at the leading level in China, and it has reliable automatic management and control functions, which can adapt to the long-term, stable, safe and reliable testing needs. Support group test data comparison and analysis, with multi-unit conversion function. New software system, refined process, smooth control, easy to learn..
Factory accessories
GA-507 Ring Initial Adhesion Testing Machine/Tester
Matters needing attention 1. The machine should be kept level and stable. 2. The steel ball should be cleaned during and after the test until it is wiped clean. 3. If the ball needs to be tested again after the steel ball test, the steel ball should also be cleaned and wiped. 4. After the completion of the test, the steel ball should be returned to the position, and some anti-rust oil should be sprayed in the box at intervals. 5. Please be operated by professionals to avoid improper operation and damage to the instrument.
| Capacity selection |
2,5,10,20kgoptional |
| Accuracy level |
Level 0.5 |
| Contact velocity |
300mm/min |
| Separation velocity |
300mm/min |
| Sample size |
Length 125mm x width 25mm |
| Test plate size |
50nm stainless steel plate with length 100mm x width 25mm x thickness (1.5 ~ 2) mm |
| Sample quantity |
≥3 |
| Control mode |
Microcomputer control or computer control is optional |
| Overall dimension |
W 400mm×D 420mm×H 700mm |
| Electric source |
220VAC±10% / 50Hz |
Audited Supplier 
){kind=link}
){kind=link}