Vibration Density Meter Powder Vibration Density Tester Densitometer/Gauge for Metal
Introduction
Powder vibration density tester in line with ISO, GB standards, in line with the requirements of the United States pharmacopoeia, the operation to achieve the most simplified, adjustable vibration frequency, can be installed three kinds of volume of the scale cylinder, low power consumption, long-term stable and reliable work.
Vibrate density or bulk density (called loose density in some industries) is defined as the mass of a sample divided by its volume, which consists of the sample itself and its pores and the volume of its Spaces. Bulk density is necessary for the characterization of catalysts, foams, insulation materials, ceramics, powder metallurgy and other industrial products
Vibration Density Meter Powder Vibration Density Tester Densitometer/Gauge for Metal
Application
Widely used in all kinds of metal powder and other rare metal powder, alloy powder or metal oxide powder, all kinds of non-metallic powder; Other powders: such as soil, dyes, medicine, pesticides, abrasives, coatings, food additives, catalysts, cement, river sediment and other powder vibration density test.
Comply with ASTM B527, D4164, D4781, IDF 134, ISO 787-11, 3953, 8460, 8967, 9161, JIS K5101-12-2, Z 2512, GB/T5211.4, MPIF 46, USP<616>Part II, BSI 527, GB/T 21354, 5162, 14853,
GB/T 5162-2006/ISO3953:1993, GB/T 5162-2006/ISO3953:1993 in the indicators
Vibration Density Meter Powder Vibration Density Tester Densitometer/Gauge for Metal
Feature
The powder density tester is composed of adjustable speed motor, vibration component, microcomputer and micro printer. And the instrument has the characteristics of compact structure, firm, simple operation.
Vibration Density Meter Powder Vibration Density Tester Densitometer/Gauge for Metal
Technical principle data:
The scale cylinder equipped with powder or particles is fixed on the mechanical vibration device, and the vibration motor drives the mechanical vibration device to vibrate vertically up and down. The scale cylinder equipped with powder or particles vibrates rhythmically with the mechanical vibration device. With the increase of vibration times, the powder or particles in the scale cylinder are gradually solidified. Read the volume of the graduated cylinder, according to the definition of density: mass divided by volume, so as to find the powder or particle density after vibration
Vibration Density Meter Powder Vibration Density Tester Densitometer/Gauge for Metal
Technical parameters:
Amplitude: 1-30mm/adjustable
Vibration number: Adjustable 15-280TAP /min
Counter: 0-9999 dial setting automatic power off
Vibrate mode: Continue and Counter modes are optional
Power supply AC 110/220 50/60Hz
Count and detect photoelectric induction
Applicable measuring cylinder mL 25 50 measuring cylinder as standard
Vibration Density Meter Powder Vibration Density Tester Densitometer/Gauge for Metal
Operation steps:
There are two vibration modes of the vibration density tester: Continue mode (vibrate until power off) or Counter mode (vibrate until a set number of times will stop). Please select before operation.
Continue mode operation mode:
1. After the speed adjustment button of the machine is turned to the position of O, connect the machine with the control box and then insert the specified power supply.
2, Adjust the height gauge to the predetermined filling height, just relax the height adjustment button and rotate the height of the filling base, then the adjustment button can be locked with tools.
3. Put the filler into the measuring cylinder, and fix the measuring cylinder with a fixed ring.
4. Select the vibration mode continue.
5, open the power button, rotate the speed control button to the appropriate speed, press the start button will start the machine.
6. At this time, the machine will keep vibrating until the power is turned off.
Counter mode operation mode:
1. After the speed adjustment button of the machine is turned to the position of O, connect the machine with the timing control box and then insert the specified power supply.
2, Adjust the height gauge to the predetermined filling height, just relax the height adjustment button and rotate the height of the filling base, then the adjustment button can be locked with tools.
3. Put the filler into the measuring cylinder, and fix the measuring cylinder with a fixed ring.
4. Select Vibration Mode Counter.
5. Set the vibration times of the timing key (0-999 times), turn on the power button, rotate the speed regulating button to the appropriate speed, press the start key and the machine will start to act. At this time, the vibration times will automatically accumulate; When the automatic cumulative number reaches the preset number, the machine will automatically cut off the power and stop filling.
6. Turn off the power again and restart. At this time, the machine will act again.
Audited Supplier 
){kind=link}