Ga-7112 Dynamic Impact Resistance Testing Machine/Ball Impact Collision Fatigue Tester

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: GA-7112
• Type: Ball Impact Tester
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Plywood Case
• Trademark: LONROY
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200pieces/Month

Product Description

GA-7112 Dynamic Impact Resistance Testing Machine/Ball Impact Collision Fatigue Tester

Product description:
This testing machine is suitable for testing the dynamic impact resistance of blue ball, football, volleyball and handball.

Test method:
1. The test machine can use two high-speed rotating drum wheels opposite each other, and throw the specimen at high speed under the action of friction and extrusion for the dynamic impact project test of the ball. Meet or exceed GB/T 22868-2008 basketball, GB/T 22892-2008 football, GB/T 22882-2008 volleyball, GB/T 14625.3-2008 and other standards. Impact rebound plate, the rebound plate bounces the specimen to the receiving funnel, passes to the throwing drum under the action of gravity, and throws the specimen out again.
2, after the set number of tests, check the pressure change in the sample, and whether it is broken, implosion, peeling,
degumming, broken wire, deformation and other phenomena.

GA-7112 Dynamic Impact Resistance Testing Machine/Ball Impact Collision Fatigue Tester

Procedure description
Ø 1.Wheel set speed means set the rotation speed of the wheel.
Ø 2.actual speed of the wheel means the actual rotation speed of the wheel;
Ø 3.Set Test times is to set the required test times;
Ø 4.Tested Times indicates the number of times that have been tested. If the value is cleared according to the current count, the value can be counted again.
4. Maintenance instructions
5. The instrument must be placed on a stable table before use.
6. It is not allowed to handle the machine during use;
7. Select the corresponding power supply voltage, do not be too high, to avoid burning the device;
8. When the instrument is abnormal, please contact the manufacturer for timely processing;
9. The machine must have a good ventilation environment when working.
10. Key mechanical components, due to the large operating load, the mechanical part please add lubricating oil in time;
11. After each test, clean the machine and keep the machine clean;
12. The control box should be wiped with dry cloth, not wet cloth.
13. Cleaning inside and outside the equipment should be done after each use of the equipment;
14. The spraying layer of the equipment should often pay attention to anti-corrosion measures to prevent corrosion, and use anti-rust oil on the outer surface of the equipment
15. Do not disassemble electrical components and equipment at will, so as not to damage the electrical control line, resulting in artificial equipment failure and affect its performance;
16. When storing and using the equipment, there are no flammable, explosive and corrosive substances around; The precision instrument of the machine shall be operated and maintained by special personnel;

 

GA-7112 Dynamic Impact Resistance Testing Machine/Ball Impact Collision Fatigue Tester