Solid Liquid Density Meter Electronic Densimeter

• After-sales Service: Yes
• Warranty: 1 Years
• Max Diameter of Workpiece: <500mm
• Accuracy Grade: 1
• Control: Manual Control
• Weight: 0-100Kg
• Model NO.: MZ-S300
• Power Source: AC220V
• Transport Package: Plywood Case
• Trademark: LONROY
• Origin: China
• Production Capacity: 200pieces/Month

Product Description

Solid Liquid Density Meter Electronic Densimeter
Introduction
The solid-liquid densitometer is used in the density test of rubber and plastic industry, chemical industry, powder metallurgy industry, food industry, powder industry and so on.The main representative products are rubber, plastic, powder metallurgy, flavor and fragrance, chemical liquid, flux, etc. Mdj-300m multifunctional density meter can realize the density test of solid liquid.
Test type: non-absorbent solid, paste: such as rubber, plastic, pearl cotton, alloy, powder metallurgy finished products, compact ceramics, magnetic materials finished products, sealant, asphalt glue, gemstone, rock, PVC/PE/PP/ABS/PPS and other granule.
Various liquid densities and concentrations: sulfuric acid, sodium hydroxide, ethanol, methanol, potassium hydroxide, etc.

Solid Liquid Density Meter Electronic Densimeter
Test Principle: it conforms to GB/T1033, GB/T2951, GB/T3850, GB/T533, GB/T208, GB/T5163, GB/T 1933, GB/T4196, GB/T4123, GB/T 611, GB/T11540, GB/T12206, GB/T5518 and other standard

Solid Liquid Density Meter Electronic Densimeter
Model: MDJ - 300M
Weighing range :0.005-300g
Density accuracy :0.001 g/cm
Density range :0.001~99.999g/cm3
Solid mode: arbitrarily shaped solid block, granular body
Liquid mode: Any fluid can be measured
Principle of measurement: The principle of Archimedes permutation. The test time is about 5 seconds
The results showed that the density and volume of solids;Liquid density, concentration %, baume Be
Parameter setting: solid: water temperature setting, medium liquid density setting;Liquid: specific gravity hammer density setting, density upper and lower limits set
Correction mode: automatic correction with one key
Output mode :RS-232C standard communication interface, convenient for test data output and printing
Power supply :AC~220V / 50HZ (outlet power supply needs to be customized, and it can be noted before ordering)

Solid Liquid Density Meter Electronic Densimeter
Solid measurement steps:
Put the product into the measuring table, measure the weight in the air, press ENTER to remember.
(2) Put the product into the water to measure the weight of the water, press ENTER to remember, display the density value.
Liquid measurement steps:
(1) Place the beaker containing the sample on the measuring board and deduct the weight of the hook.
(2) Put the standard weight into the liquid to be measured with a hook and hang it on the measuring stand to display the density value