Mfr Mvr Testing Machine for Plasitc Mfi Tester Electronic Loading

• After-sales Service: Online
• Warranty: 1 Years
• Transport Package: Plywood Case
• Trademark: LONROY
• Origin: China
• Model NO.: LR-A001-C
• HS Code: 9024800000
• Production Capacity: 200pieces/Month

Product Description

MFR MVR Testing Machine For Plasitc MFI Tester Electronic Loading
Discription:
This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, petrochemical industry and related colleges and universities.


Standard:
GB/T3682-2018,ISO1133-2011, ASTM D1238-13 

MFR MVR Testing Machine For Plasitc MFI Tester Electronic Loading
Product Character:
Ø 1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
Ø 2.Resolution temperature was 0.1 ºC, the temperature fluctuation of not more than 0.5 ºC within 24 hours, the displacement sensor resolution is 0.001 mm.
Temperature and temperature protection device
Ø 3.Hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)
Ø 4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.
Ø 5.Can be set up in 240 seconds (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) preheating time, etc.
Ø 6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
The internal microtyping machine is convenient for printing and testing data
Ø 7.High precision touch screen controller, 7 inch touch screen, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, test conditions (temperature, weight weight, blanking intervals), test results data.
Ø 8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
Ø 9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease


Test Methods:MFR +MVR Methods
Display Mode:English color touch screen display

MFR MVR Testing Machine For Plasitc MFI Tester Electronic Loading
Specification

Model	LR-A001-C
Barrel parameters	Inner hole 9.550±0.005mm   length 163mm
Pistons head  parameters	Piston head:  9.474±0.005mm
Piston rod diameter	8.94mm
Mold length	8.000±0.025mm
Mold nominal inner diameter	2.0955±0.0051mm
Half die length	4.000±0.025mm
Half die nominal inner diameter	1.050±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature range	Room Temperature~500degree centigrade
Temperature fluctuation	±0.2 ºC
Temperature uniformity	±1ºC
Temperature display resolution	0.1ºC
Display resolution	0.1ºC
Maximum comsuption	< 600W
Time display resolution	0.1s
Weight parameters are as follows:
Weight accuracy	±0.5%
Basic configuration	A    0.325kg
	B    1.2kg
	C    2.16kg
	D    3.8kg
	E     5kg
	F     10kg
	G    12.5kg
	H     21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 min.
Material be installed	1 min.
Material sample temperature recovery time	4 min.
When binder set	1min
Output mode	Micro-automatic print output
Cut material methods	The hand automatic cut into one body
Test load	Eight sets of weights
Power	AC220V±10%   50/60HZ

Rubber and Plastic Electric Melt Index Tester, Melt-Blown Cloth Raw Material Melting Index Instrument
Accessories List

No	Name	Qty	Remark
1	Weight	1 set	0.325kg,0.875lg,1.835kg,2.5kg,2.915kg,3.475kg,4.615kg,5.0kg
2	Weight tray	1pcs	Within level 1 load
3	Charging hopper	1pcs
4	Mouth mold cleaning rod	1pcs
5	Charging bar	1pcs
6	Cylinder cleaning rod	1pcs
7	piston rod	1pcs
8	mouth mold	1pcs
9	gauze	2roll
10	Print paper	2 roll

Rubber and Plastic Electric Melt Index Tester, Melt-Blown Cloth Raw Material Melting Index Instrument
Standard test force(8 level)
1  level:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)
=3.187N
   2  level:1.200 kg=(0.325+No2  0.875 weight)=11.77 N
   3  level:2.160 kg=(0.325+No3  1.835 Weight)=21.18 N
   4  Level:3.800 kg=(0.325+No4  3.475Weight)=37.26 N
   5  Level:5.000 kg=(0.325+No.5  4.675Weight)=49.03 N
   6  Level:10.000 kg=(0.325+No.5  4.675weight+No.6 5.000Weight)=98.07 N
   7  Level:12.000 kg=(0.325+No.5  4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
   8  level:21.600 kg=(0.325+No.2  0.875weight+No3. 1.835+No.4
 3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N

Rubber and Plastic Electric Melt Index Tester, Melt-Blown Cloth Raw Material Melting Index Instrument
List of components 

No	Name	Unit	Qty	Remark
1	Relay	set	3	Taiwan YangMING
2	Temperature Sensor	pcs	2	UK RS PT100
3	Power switch	pcs	1	Zheniang hongbo
4	Heating jacket	pcs	2	High temperature pure copper heating sleeve
5	Controller (including touch screen)	pcs	1	Self-developed, intelligent multi-point temperature control system (including 7-inch touch screen)
6	Lifting motor	pcs	1	Taiwan puloviac AC motor
7	Cutting machine	pcs	1	Taiwan imports pulovid
8	Transformer	pcs	1	Guangzhou baiyun
9	Encoder	pcs	1	Japan's original omron
10	Opening mould	pcs	1	Tungsten steel
11	Cylinder	pcs	1	The treatment of nitrification and corrosion resistance
12	Printer	pcs	1	Beijing weihuang