| Customization: | Available |
|---|---|
| After-sales Service: | online |
| Warranty: | 1 year |
|
Still deciding? Get samples of US$ 1500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DXR material apparent porosity tester Ceramic product bulk density tester bulk density meter
1.product introduction
This instrument uses the vacuum method to measure the apparent porosity, bulk density, and volume density of ceramic products, refractory materials, carbon, graphite and other materials. The instrument meets the requirements of GB/T1966 "Test Method for Apparent Porosity and Bulk Density of Porous Ceramics", YB/T5200 "Test Method for Apparent Porosity and Bulk Density of Dense Refractory Castable Materials", GB/T6156 "Method for Determination of Apparent Porosity and Bulk Density of Carbon Materials
DXR material apparent porosity tester Ceramic product bulk density tester bulk density meter
2. Technical conditions
| Volume | 250×300(mm) |
| Vacuum degree |
≥ 0.095MPa; accurately adjusted using imported vacuum adjustment table |
| Vacuuming time |
0 ~ 99 minutes and 59 seconds can be set arbitrarily |
| Water injection time | arbitrarily set from 0 to 99 minutes and 59 seconds |
| Holding time | arbitrarily set from 0 to 99 hours and 59 minutes |
| Repeatability error | <3% |
| Power supply |
220V, 200W |
DXR material apparent porosity tester Ceramic product bulk density tester bulk density meter
3.Configuration
1. One vacuum device (host),
2. One sample rack,
3. One 2000g/0.01g still water balance (according to contract configuration requirements).
){kind=link}