ISO9227 Salt Spray Test Equipment Salt Spray Ageing Chamber Environmental Chamber Test Apparatus

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: LR-B007
• Type: Salt Spray Tester
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Plywood Cases
• Specification: 190*130*140cm
• Trademark: LONROY
• Origin: Guangdong
• HS Code: 9024800000
• Production Capacity: 200

Product Description

ISO9227 Salt Spray Test Equipment Salt Spray Ageing Chamber Environmental Chamber Test Apparatus

Use:

This machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.

 

Design Standards:ISO 9227,GB/T 2423.17-1993 ,GB/T 2423.18-2000,GB/T 10125-1997,ASTM.B117-97

JIS H8502 ,IEC68-2-11,IEC68-2-52 1996 ,GB.10587-89,CNS.4158,CNS.4159,CASS,GB/T 12967.3-91 CASS

ISO9227 Salt Spray Test Equipment Salt Spray Ageing Chamber Environmental Chamber Test Apparatus

Specification:

Inner size	1200×1000×500(L×W×H)mm
Outside size	1900×1300×1400(L×W×H)mm
Test room temperature	NSS ACSS 35ºC±1ºC/ CASS 50ºC±1ºC
Pressure Barrel Temperature	NSS ACSS 47ºC±1ºC/ CASS 63ºC±1ºC
Laboratory capacity	600L
Volume of salt water tank	25L
Compressed air pressure	1.00±0.01kgf/cm2
Volume of spray	1.0-2.0ml/80cm2.h
Laboratory relative humidity	85%RH above

 

 

ISO9227 Salt Spray Test Equipment Salt Spray Ageing Chamber Environmental Chamber Test Apparatus

Character

1.	Imported gray P.V.C board, special treatment resistant to corrosion.V - shaped frame and stainless steel tube Angle, make sure the test object into 30 degrees Angle, four wheels glide, can push to go.
2.	Fine workmanship, beautiful appearance, high transparency, pneumatic open cover.
3.	Automatic/manual water filling system is adopted, with the function of automatic/manual water filling when water level is insufficient.The experiment will not be interrupted to meet the diversified environmental requirements of the guests.(automatic water rehydration only needs to be connected to the water pipe.)
4.	Nozzle: the spray tower is equipped with a cone disperser, which can guide fog, regulate the amount of fog, and even fog falling.
5.	Use high-precision multi-function timer and the test time can be set to multi-function. With the power failure memory function, continue to work after the power failure, until the required time is completed, and avoid redoing the experiment after the power failure.
6.	In the salt spray test, direct steam heating is adopted, the heating speed is fast, the temperature distribution is uniform, and the standby time is shortened.
7.	Two-key automatic operation.With full trouble warning system.When the fault occurs, the light can be turned on and the buzzer will alarm.
8.	Two internal fog collecting tubes are used.It is less likely to be damaged than the traditional outer-type.
9.	With overload short-circuit protection.To prevent the damage of the instrument and its internal electronic control parts.
10.	The inner and outer box is connected with the seal groove and sealed with water.
11.	The imported temperature controller USES digital display,PID control,error±0.1ºC.
12.	Temperature range:1:Test room temperature:35ºC--Pressure barrel temperature:50ºC(can set)           2:Test room temperature:47ºC--Pressure barrel temperature:63ºC(can set)
13.	The refill bottle is made of recessed water level window, which is easy to clean.
14.	Heat speed:1:Test room,RT---→35ºC  About 35minutes           2:Pressure barrel,RT---→47ºC  About 15minutes
15.	Temperature accuracy:±1ºC
16	International standard:RELATEU STANDARDS CNS 3627,3885,4159,7669,8866; JIS D-0201,H-8502,H-8610,K-5400,Z-2371,ISO3768,3769,3770; ASTM B-117,ASTM B-268 B-268,GB-T2423,GJB150.

ISO9227 Salt Spray Test Equipment Salt Spray Ageing Chamber Environmental Chamber Test Apparatus

Control panel and electrical accessories:

Temperature controller(Zhejiang dahua)	2pcs
Pressure gauge(Japan KKK)	1pcs
Indicator light(Taiwan)	5pcs
Timer(DHC)	1pcs
Controller switch(Taiwan)	2pcs
SSR (Taiwan yangming)	2pcs
Relay(Japan OMRON)	1pcs
Temperature sensor(taiwan shenjie)	2pcs
Pressure regulating valve(Japan SMC)	2pcs
Solenoid valve(Japan OMRON)	4pcs

ISO9227 Salt Spray Test Equipment Salt Spray Ageing Chamber Environmental Chamber Test Apparatus

Accessories inside chamber                     

Spray tower	2set
Sample shelf	10pcs
Sample putting rods	14pcs
Standard measuring cylinder	2pcs
Temperature pointer	2pcs
Collector	2pcs
Glass nozzles	2pcs
Defog system	1group

               
ISO9227 Salt Spray Test Equipment Salt Spray Ageing Chamber Environmental Chamber Test Apparatus

Accessory:

NacI 2bottle,Measuring cup1pcs,Operation manual 1pcs,quality certificate,1pcs.