Customization: | Available |
---|---|
After-sales Service: | Online After-Sales Service |
Power Supply: | 220V |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
GB11158 | High Temperature Test Chamber Technical Condition |
GB10589-89 | Low Temperature Test Chamber Technical Condition |
GB10592-89 | High-low Temperature Test Chamber Technical Condition |
GB/T10586-89 | Damp Heat Test Chamber Technical Condition |
GB/T2423.1-2001 | Low Temperature Test Chamber Test Methods |
GB/T2423.2-2001 | High Temperature Test Chamber Test Methods |
GB/T2423.3-93 | Damp Heat Test Chamber Test Methods |
GB/T2423.4-93 | Alternating Damp-Heat Test Methods |
GB/T2423.22-2001 | Temperature Changing Test Methods |
IEC60068-2-1.1990 | Low Temperature Test Chamber Test Methods |
IEC60068-2-2.1974 | High Temperature Test Chamber Test Methods |
GJB150.3 | High Temperature Test Methods |
GJB150.4 | Low Temperature Test Methods |
GJB150.9 | Damp Heat Test Methods |
|
Constant Temperature and humidity test chamber 36L |
|
It simulates the products in the chamber where the climate condition of different temperature and humidity, such as high-low operation and storage, temperature cycling, high-low temperature and high-low humidity, moisture condensation etc. to check its adaptability and changing performance. It's required to conform to international regulation (IEC, JIS, GB, MIL…) to reach the consistency (including test schedule, condition, method) under the international standard. |
|
The chamber applies to: compatibility test for store, transportation and application of electric, electronic products, unit components, parts and other materials under high or low temperature. The following samples are prohibited to be tested and stored:
|
|
|
|
36L W 350 x H300 x D350mm W900 x H760 x D920mm 170KG |
|
|
|
Temperature:+25ºC, Humidity: ≤85%, no samples in the chamber |
|
GB/T 5170.2-1996 Temperature test chamber GB/T5170.5-1996 Temperature and humidity test chamber (only temperature and humidity) |
|
-20ºC→+150ºC (adjustable) |
|
±0.5ºC |
|
±2.0ºC |
|
30%~98%R.H (temperature at 20ºC-85ºC) |
|
±2.5%R.H. |
|
±3.0%. |
|
-20ºC → +150ºC Heat up for 2-4.0ºC/min |
|
+150ºC→ -20ºC Cooling for 0.7-1.0ºC/min |
|
Testing space is not more than 3/4 of the total space, no heating |
|
Stainless steel punching stencil |
|
|
|
GB/T 2423.1-2001 Test A: Low temperature test method GB/T 2423.2-2001 Test B: High temperature test method GJB 150.3-1986 High temperature test GJB 150.4-1986 Low temperature test IEC68-2-1 Test A: Cold IEC68-2-2 Test B: Dry heat GB11158 "Technical Conditions for High Temperature Test Chamber " GB10586-1 "Technical conditions for Damp heat test chamber " GB/T 2423.2 "Basic environmental testing procedures for electric and electronic products B: High temperature test method". GB/T 2423.3 "Basic environmental testing procedures for electric and electronic products Ca: Constant damp heat testing method" etc. |