Universal Test Components Spectrophotometer for liquid reagent sauce powder
Product Introduction Scope of use: can be used for high concentration liquid reagent, sauce (such as ketchup, coating), powder (such as coffee) and other samples of reflection color measurement. The YS multifunctional test component can be used as follows: 1, YS multi-functional test components to be used with YS series spectroscopic colorimeter, before use, YS series spectroscopic colorimeter to black, white board correction. 2, place the YS series color measurement instrument according to the figure is good, the color measurement instrument of measuring port to support good butt, at the same time two base panel pin to benchmark and YS colorimeter bottom hole alignment, then push board to resist color measurement instrument, tighten the screw wire, check whether the color measurement instrument is loose, if loose, please be sure to tighten the screw again. 3. Load the cuvette of the sample to be tested and load it into the bracket. Gently push the rotary pressing plate, gently put the cuvette, cuvette side close to the instrument measuring mouth, one side is compressed by the rotary pressing plate; Note that the height OF the liquid in the cuvette should be greater than the fit height of the test mouth diameter (i.e. the height of the sample reaches more than half a cup). 4. Cover the cover plate and ensure that the inner cuvette is completely black. After completing the above steps, the YS series colorimeter can be used to measure the reflection colorimetry of the sample.
Audited Supplier 
){kind=link}