10kv Single-Phase Cable Small Current Ground Fault Locator/Overhead Line Grounding Fault Finder

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: KDJK-10KV
• Type: Cable Fault Locator
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Plywood Case
• Trademark: LONROY
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200pieces/Month

Product Description

10KV single-phase cable small current ground fault locator/Overhead line grounding fault finder

It is suitable for fast and accurate location of ground point after power failure of 6-35KV fault line, small current grounding system of cable distribution network, detection of overhead line gold grounding, arc grounding, transition resistance grounding and other fault location.

After the fault line is shut down, the transmitter applies low frequency and high voltage to the line to make the fault repeat. The sensor is hung on the line with an insulated rod along the line to detect the applied current signal, and the data is transmitted wirelessly to the handheld receiver to display the measurement results. Before the fault point, the current signal continues to exist, and after the fault point, the current signal disappears. The fault location can be quickly determined by rough segmentation followed by precise fixing.

10KV single-phase cable small current ground fault locator/Overhead line grounding fault finder
Product features:
1, suitable for small current grounding system distribution network, detection of overhead lines of metal grounding, arc grounding, grounding through the transition resistance and other faults;
2, apply high voltage signal to reproduce the fault, constant current signal is stable, easy to detect;
3, low frequency signal to avoid the impact of system capacitance, can measure high fault resistance;
4, transmitter safety features: high voltage start blocking function, short circuit output allowed;
5, sensor and receiver wireless signal transmission, safe and reliable;
6, the transmitter can use the mains or automotive power supply, sensor and receiver dry battery power supply;
7. Small size and light weight of transmitter; The sensor is designed to reduce the volume and weight, and it is convenient to connect along the line. The receiver is hand-held design;
8, the receiver uses a large screen LCD display, showing the line current waveform and grounding status.

1. Test the signal generator

Positioning accuracy	0.2m
Output frequency	1Hz
Open circuit voltage	fundamental wave RMS 0 ~ 2800V
Current test range	100mA
Ground fault measurement range	Ground resistance ≤100 Kω
Pulsating DC	0 ~ 8kV, equivalent to the peak phase voltage of 10kV lines
Detection line length	≥120km
Short-circuit current	fundamental wave RMS 0 ~ 30mA
Signal output range	0 ~ 100mA
Signal output accuracy	±1mA
Wireless communication distance between sensor and receiver	not less than 30m
Transmitter output power	maximum power 1000W
Transmitter power supply	AC 220V mains, generator (output power ≥1500W)
Weight	15kg
Volume	455×335×310mm

2, signal transmission sensor

Detect the cross-frequency signal emitted by the test signal generator.
Automatic timing.
Automatically displays the communication status with the pliers meter.
Automatic display of device voltage.
Automatic low voltage alarm.
Detects the load current of the line.
Clamp CT was used to measure the different frequency signal and load current.
Can be used to measure insulated lines.
Can display the current clamp battery status and battery voltage in real time.
Test accuracy	±1%±3dgt(23ºC±5ºC, below 80%RH)
Detection range	0.1mA ~ 100.0mA
Transmission mode	wireless RF mode
Transmission frequency	433MHz
Transmission distance	≥30m
Mouth diameter	≥40mm
Working temperature	-30ºC ~ 70ºC
Power supply	3 No. 7 alkaline dry batteries.
Weight	0.45kg
Volume	180×100×35mm

10KV single-phase cable small current ground fault locator/Overhead line grounding fault finder
3.Signal receiver

Receive and display data from a handheld data detector.
You can lock and hold data.
In automatic pairing, the communication status with the pliers meter is displayed automatically
Automatic display device voltage, automatic low voltage alarm.
Display the detected signal size in digital mode
Data transmitted by handheld signal detection devices can be stored.
Display mode	Large screen LCD, backlight function.
Wireless distance	not less than 80m
Historical data can be stored for	≥500 times.
You can set up a variety of ways to work.
Data from the host and receiver can be read.
Working temperature	-30ºC ~ 70ºC.
Power supply	5 No. 5 alkaline dry batteries.
Weight	0.45kg
Volume	205 ×100×35mm

Cable ground fault locator